Tech-Swag

Delivering The Latest Tech Innovations To Your Door

0

Your Cart

DIY Smart Spider Robot

The DIY Smart Spider Robot Node MCU is an open source IoT platform, suitable for Arduino programming environment. The source code has been burned, & the code can be open sourced for secondary development, which is simple & easy to use. Expansion board reserved 8 servo motors, Node MCU socket, easy to plug. Download data from the Micro-USB interface above. The following interface is used for charging, the blue terminal is connected to the battery, & the blue & white is the switch. The DIY Smart Spider Robot supports multiple WIFI device remote controls. It supports remote control of various mobile phones such as Android/IOS, & can also use a computer with a wireless network card device.

Open WIFI settings, search for “Robot-” WIFI device, default password: 12345678.
Enter in the browser bar: 192.168.4.1 IP address, get the interface as shown in the figure below, and start control.

3D Printed Structural Parts

The full set of structural parts are made of PCL, and the parts are all printed by a 3D printer.
The place where the steering gear arm needs to be installed has been reserved, and the place where the screw needs to be installed has also been reserved for screw holes. The screw can be easily screwed in with a screwdriver.

Size

21.5mmX11.8mmX22.7mm

Compatible With

NodeMCU

Weight

9g

No Load Speed

0.12s/60 Degrees (4.8V) 0.002s/Degrees

Locked-Rotor Torque

1.2-1.4 kg/cm (4.8V)

Operating Temperature

-30~~+60 Degrees Celsius

Dead Zone Setting

7us (7MHZ)

Working Voltage

4.8V-6V

Lithium Battery Capacity

400mah

Charging Voltage

4.2V

Brand Name

SHIDIMUSTEM

Reviews

There are no reviews yet.

Be the first to review “DIY Smart Spider Robot”

Your email address will not be published. Required fields are marked *

X